- Check the shift rail on the transmission. This particular transmission has a single shift rail, instead of a rail for each gear. …
- Look at the body of the transmission. It has a front half and a back half. …
- Locate the plugs. …
- Look at the overall shape of the transmission.
What vehicles did the NV3500 come in?
The NV3500 is manufactured for both four-wheel drive and two-wheel drive vehicles. The current NV3500 is found in full size GM trucks from 1988 and newer, S10 trucks from 1990 and newer, and Dodge Dakota V8 Ram trucks from 1994 and newer. The NV3500 is a five-speed manual transmission.
What transmission can replace NV3500?
5spd Tranny Alternative to the NV3500 and T56.
How much power can a NV3500 transmission handle?
NV3500 MG5 has a input torque of 300ft-lbs. with my stock 350 pulling 212hp @4000 and 300ft-lbs @2800 I have had two fail and one of those went out leaving me with only 4th gear. I swapped it with a NV4500 MW3 2004 model. NV4500 can handle 475ft-lbs.
What manual transmission is in a S10?
NV1500 Manual Transmission for GM 96-99 S10 S15 And Sonoma 2.2L 5 Speed RWD Zumbrota Drivetrain. Product Description: Zumbrota Drivetrain has served a nationwide customer base for over 30 years.
What is the difference between NV3500 and NV4500?
NV3500 is light duty and aluminum with the bellhousing made as part of the case. A NV4500 has a much higher load rating, granny 1st gear, cast iron case with bolt on aluminum bell, much larger overall and has PTO ports.
Are all NV3500 transmissions the same?
Are all NV3500 transmissions the same? There are light-duty and heavy-duty variants of the NV3500, although the latter was offered only on Chrysler trucks. You’ll also have a wide ratio and a narrow ratio version to choose from, with the former featuring taller 1st and 2nd gears.
Can a NV3500 handle a 350?
Registered. A NV3500 is good to about 300 ft lbs of torque, the vortec 350 makes around 325. You should be alright the factory rates the transmission at a lower rating, I would say they are good to about 375 and thats if it gets a good hook on some big meats.
How much horsepower can a T56 transmission handle?
However, even the best over-the-shelf manual transmissions are only rated to handle 700 hp. In an effort to save the manuals, we contacted Tick Performance of Mount Airy North Carolina to see inside their Stage 5 Tremec T56 Magnum transmissions. They claim this fully synchronized six-speed is good for 900 rwhp.
How strong is a NV3500 transmission?
Different animals here. NV3500 = 340 ft/lb input tq, 3.49:1 1st gear. NV3550 = 300 ft/lb input tq, 4.01:1 1st gear.
What transmission is in a 91 S10?
It was equipped with a 4L60 automatic transmission and a limited-slip differential with 3.42:1 gearing.
What transmission is in a 2001 Chevy S10?
5-Speed Manual Transmission .. 4L60-E 4-Speed Electronic Automatic Transmission ………… Four-Wheel-Drive System… Suspension …….
What does Chevy S10 stand for?
Vehicles. Chevrolet S-10, a pickup truck. S10 (Nissan Silvia), second generation of the car. Stemme S10, a self-launching sailplane. Rans S-10 Sakota, aerobatic aircraft.
Which is better NV4500 or NV5600?
The NV5600 is the workhorse trans that has tighter ratios (ending with the same final drive) than the NV4500. The gap between 3rd and 4th in my 4500 is considerable, so towing lots of weight uphill takes forethought on what gear you wanna be in/what point you need to shift, but nothing crazy.
How much HP can a NV4500 handle?
Registered. The NV4500 will not hold up to steady towing even if you limit it’s input to less than 300HP. If you limit application of power to everything but 4th it should hold up pretty well.
Are Dodge and Chevy NV4500 the same?
Chevy NV4500 transmission. The gear ratios of all of the Dodge version NV4500s remained the same, which is a 1st gear of 5.61:1; 2nd 3.04:1; 3rd 1.67:1; 4th 1:1 ratio, and a 27% overdrive. … This input shaft can be interchanged with other NV4500 input shafts with this 5.61 1st gear ratio.
